吡咯烷酮酸性离子液体的合成及其对酯化反应的催化活性

合成并表征了 2-吡咯烷酮硫酸氢盐([Hnhp]HSO4)、 1-甲基-2-吡咯烷酮硫酸氢盐([Hnmp]HSO4)、 1-甲基咪唑硫酸氢盐([Hmim]HSO4)、 1-(3-磺酸基)-丙基-3-甲基咪唑硫酸氢盐([C3SO3Hmim]HSO4)和1-(3-磺酸基)-丙基-2-吡咯烷酮硫酸氢盐([C3SO3Hnhp]HSO4)等以HSO-4为阴离子的质子酸离子液体,并以乙酸和正丁醇的酯化反应考察了这些离子液体的催化活性.结果表明,当n(n-BuOH):n(MeCO2H):n([C3SO3Hnhp]HSO4)=1.2:1:0.005,反应温度为120 ℃和反应时间为 1 h 时,酯收率可达99%以上;反应结束后离子液体与酯产物可分成两相,而且该离子液体重复使用8次,催化活性没有明显下降.探讨了阳离子结构及Brnsted酸性对催化活性的影响,考察了离子液体与酯化反应相关组分的互溶性.结果表明,离子液体的分相性能对催化效果有较大的影响,离子液体的催化活性与其酸性、溶解性密切相关.     

Speed of Sound, Isentropic Compressibilities, and Excess Molar Volumes of Binary Mixtures Containing p-Dioxane

The speed of sound u in and densities of eight binary mixtures of p-dioxane (p-C₄H₈O₂) with methylcyclohexane (c-C₆H₁₁CH₃), 1-chlorohexane (C₆H₁₃C1), 1-bromohexane (C₆H₁₃Br), p-xylene [C₆H₄(CH₃)₂], propylbenzene (C₆H₅C₃H₇), methyl acetate CH₃COOCH₃), butyl acetate (CH₃COOC₄H₉), and amyl acetate (CH₃COOC₅H₁₁) were measured over the whole composition range at 30°C. Isentropic compressibilities (K _S), Rao's molar sound functions (R), excess molar volumes (V ^E), excess isentropic compressibilities (K _S ^E ) together with relative change in volume V/₁₂ values, have been obtained for all measured mole fractions. The excess partial molar volume (V₁-V ₁ ⁰ ) of p-dioxane in different solvents have also been estimated. The experimental results have been analyzed in terms of the Prigogine–Flory–Patterson theory of solutions.     

Picolinamide-Cu(Ac)2-imprinted polymer with high potential for recognition of picolinamide-copper acetate complex

In this report, with semi-empirical quantum method, we have studied the conformation and energy of supermolecule composed of picolinamide and its positional isomers with methacrylic acid. We tried to explore the reason why picolinamide was not likely to show imprinting effect when using methacrylic acid as functional monomer in our previous work. In order to produce imprinting effect, which was not achieved based on hydrogen bonding interaction, we have synthesized a molecular-imprinted polymer (MIP) based on copper ion coordination in prepolymerization. The complex in prepolymerization was composed of copper(II), acetate, picolinamide and 4-vinylpyridine (4-Vpy). Suprisingly, the MIP had high selectivity to picolinamide-copper acetate complex, and changes of either copper ion, picolinamide or acetate would result in decrease in the imprinting effect. This is also the first example where the high selective recognition of the MIP to its template was achieved mainly by inhibiting the binding of non-template rather than enhancing the binding of the template. And this report can be also looked upon as a first step towards the solution to the problem of imprinting of template that contains intramolecular hydrogen bond.     

Cure kinetics of epoxy resin and thermoplastic polymer

The cure kinetics and morphology of diglycidyl ether of bisphenol A (DGEBA) modified with polyvinyl acetate (PVAc) using diaminodiphenylmethane (DDM) as hardener were investigated through differential scanning calorimetry (DSC) and environmental scanning electron microscopy (ESEM). Isothermal curing measurements were carried out at 150, 120 and 80°C. The kinetic parameters were obtained using the general autocatalytic chemically controlled model. The comparison of the kinetic data indicates that the presence of PVAc does not change the autocatalytic nature of the cure reaction. Two T _g’s were observed in the fully cured samples of the modified systems. ESEM micrographies confirm the biphasic morphology.     

Conductance studies in amide-water mixtures. II. Sodium salts inN,N-dimethylformamide-water mixtures at 35°C

Conductance data for sodium nitrite, chloride, and acetate in water andN,N-dimethylformamide (DMF)-water mixtures (74.82D42.48) for the concentration range 0.001–0.04N, as well as the densities, viscosities, and dielectric constants of the solvent mixtures at 35°C, are reported. The data have been analyzed by the Fuoss (1975) equation. The existence of a maximum in the viscosity at a 13 mole ratio of DMF and water is indicated. The Walden products for all the three salts pass through a maximum while the equivalent conductances show a minimum with increasing DMF content. The maxima in the Walden product are attributed to the dehydration of ions by the cosolvent (DMF).Part I:Indian J. Chem. 14A, 1015 (1976).Deceased.     

铸膜溶剂对CAB膜形态和性能的影响

以ＣＡＢ高分子为膜材料，研究了铸膜液的溶剂体生添加剂对膜形态及选择性渗透Ｎ２、Ｏ２、ＣＨ４、ＣＯ２等气体的影响。溶剂体系以丙酮为基本组分，混合甲酰胺或乙酸，可得到具有好的气体渗透性或气体选择性的非对称膜，通过溶剂的红外光谱羰基吸收峰的偏移，认为溶剂体系有可能存在Ｌｅｗｉｓ酸；碱络合物。     

醋酸乙烯酯在硅橡胶上的辐射接枝研究

研究了不同溶剂中的醋酸乙烯酯在硅橡胶上的辐射接技状况及接枝后硅橡胶表面结构情况．结果表明：（１）在硅橡胶－乙酸乙酯－醋酸乙烯酯体系中，接枝有自加速效应；（２）适量加入对苯二酚，接枝诱导期延长，接枝速率下降，凝胶效应消失，辐射接技经验关联式为ＲＰ＝０．２７×［Ｄ］（－０．５６０）×［Ｉ］（０．４９０）×［Ｃ］（０．９２０），接核反应为扩散控制反应；（３）不同的溶剂对硅橡胶接枝有不同的影响，如甲醇发生敏化作用，提高接枝速率，而苯发生惰化作用，降低接枝速率；（４）在合适的甲醇和苯配比时，接枝反应几乎恒速进行，用扫描电镜（ＳＥＭ）观察断面，接枝区比较均一，出现微相分离．     

Salt effects and the mechanism of electrophilic mercuration of unsaturated compounds

The reaction of Hg(OAc)₂ with bornylene in THF-H₂O and CH₃CN-H₂O mixed solvents (75 25, v/v) was studied. The effects of the addition of NaOAc on the reaction rate and the composition of products were investigated. In the CH₃CN-H₂O mixture, the addition of NaOAc decreases the amount of the rearranged product, fundamentally changes the ratio between the regioisomeric solvoadducts, and promotes the formation of products of Hg(OAc)₂ addition. The reaction proceedsvia an ion pair and free mercurinium ion; the cation of the ion pair and the free mercurinium ion have dissimilar structures.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 544–548, March, 1995.     

Catalysis of cationic surfactants in organic solvent: Hydrolysis of 2-nitro-4-carboxyphenyl acetate

The hydrolysis reaction of 2-nitro-4-carboxyphenyl acetate was studied in dichloromethane in the presence of an added electrolyte (NaOH) and cationic surfactants systems with varying quantities of added water at 25°C. The kinetic and conductivity data were correlated.